Halvaine / Craft

Nine days for one movement.

One watchmaker per H-02, from the bare plate to the signature on the regulation sheet.

The nine days

What happens at the bench.

  1. Days 1 to 2

    Finishing by hand

    Côtes de Genève on the bridges, perlage on the plate, 0.12 mm chamfers polished with wood and diamond paste.

  2. Day 3

    Bluing the screws

    Twenty-two screws heated one by one until the steel turns blue at 290 °C.

  3. Days 4 to 5

    Assembly

    186 parts, 31 jewels, oiled at 14 points with five different oils.

  4. Day 6

    The second time

    The 24-hour wheel is set against the hour wheel so the ember hand never lags.

  5. Days 7 to 8

    Regulation

    Six positions, three temperatures. Within −2 / +4 seconds a day or it starts again.

  6. Day 9

    Casing and the line

    The rotor is engraved, the case closed, the number written on the caseback by hand.

Hand-finished movement detail: striped plates, polished wheels, jewels and blued screws.

The finish

Seen only from the inside.

A brushed titanium bar and milled case rings on black slate.
Titanium, grade 5

Material 01

Titanium, grade 5.

Milled from bar in 38 operations. 40% lighter than steel, warm on the wrist within a minute.

A cut blue sapphire and a raw crystal on black glass.
Sapphire

Material 02

Sapphire, both sides.

Grown as a crystal, cut, domed and coated on both faces so the dial reads without a reflection.

A rolled midnight blue calf leather strap on black slate.
Midnight calf

Material 03

Midnight calf.

Vegetable-tanned, edges painted in seven coats, 20 mm at the lugs tapering to 16 at the buckle.

Reserve a piece